User's Manual

USER MANUAL V0.9
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Phone [phone]
Fax [phone]
[e-mail]
www.enocean.com
Subject to modifications
PTM 210 / 210C step EA User Manual V0.9
October 18, 2011 4:33 PM
Page 5/17
PTM 210 / 210C STEP EA
1.2 Typical Applications
 Building installation
 Industrial automation
 Consumer electronics
Key applications are wall-mounted flat rocker switches with 1 or 2 rockers, as well as hand-
held remote controls with up to 4 single pushbuttons. Because the RF transmitters are self-
powered (no batteries), maintenance-free RF systems are possible.
1.3 Technical Data
Power supply power generation by rocker operating (Electrodynamic Power Generator)
Antenna PTM 210C external whip antenna 26.8 cm, ø1.3
0.1
mm
Antenna PTM 210 internal PCB antenna
Frequency 315.0 MHz (PTM 210C) / 868.3 MHz (PTM 210)
Data rate / Modulation type 125 kbps / ASK
Channels 2 with 4 action states each (upper/lower pushbutton is pressed/released)
EnOcean Equipment Profile supported EEP F6-02-xx, F6-03-xx, F6-04-xx
Transmission range typ. 300 m free field, typ. 30 m indoor
Telegram packet length (sub telegram) 0.7 ms +/- 5%
Number of channels 2 channels with action states each
(upper/lower contact nipple is pressed/released)
Device-identifier individual 32-bit ID (factory programmed)
No. of (redundant) packets PTM 210: 3 / PTM 210C: 3–5 (depending on residual energy)
1.4 Mechanical Interface
Module dimensions (inclusive rotation axis and energy bow) 40.0 x 40.0 x 11.2 mm
Device weight 20 g ± 1 g
Energy bow travel / operating force 1.8 mm / approx. 7 N *)
*) at room temperature, only one energy bow may be actuated at the same time!
Restoring force at energy bow 0.5 N to 4 N
For the correct function of the application, the specified minimal restoring force of 0.5 N must be considered!
Number of operations typ. 50.000 actuations tested according to VDE 0632 / EN 60669
Cover material Hostaform (POM)
Energy bow material PBT (50% GV)