User's Manual

USER MANUAL

PTM 210 / PTM 215 / PTM 215U / PTM 215J

DC Step code and later

2 SBC

3 SBC

4 SBC

Energy bow

press

N/A

Switch to

Normal Mode

Energy bow

press/release

Transmit secure teach in –

if current mode is security

with implicit RLC.

Transmit secure teach in –

if current mode is security

with explicit RLC.

N/A

Energy bow

press/release/press

Switch to Security mode

with implicit RLC & trans-

mit secure teach-in.

Switch to Security mode

with explicit RLC & trans-

mit secure teach-in.

N/A

Table 3 Transition table

Before changing the operating mode please make sure to clear the device from all

receivers which have been teached-in with this device before. Otherwise the re-

ceiver will ignore the telegrams and the application will not work.

3.4 Factory Reset

The PTM module can execute a factory reset to return to the defined factory defaults. All

changes done via SBC or the NFC interface with the exception of the following will be reset:

 Custom NFC message described in chapter 5.3.2.

The factory reset is executed with the 4 nipple SBC and simultaneously the sequence of 7x

times pressing & releasing the energy bow.