User's Manual

USER MANUAL

PTM 210 / PTM 215 / PTM 215U / PTM 215J

DC Step code and later

and NFC readers such as NFC-enabled smartphones or tablets. It can be used to determine

all essential product parameters.

The app is mainly aimed at OEMs and installers. They can also use the application to integrate

NFC devices into existing systems. EnOcean Tool can be used to optimize the energy con-

sumption of the respective device, monitor the energy-harvesting performance of the inte-

grated solar cell (in sensors) and read out all product information such as product ID or

device recognition. Access to the NFC interface is protected by a user-defined PIN code.

The EnOcean Tool app is available free of charge for the operating systems iOS and Android.

For app downloads, tutorial videos and more details please visit the EnOcean Tool Product

page: https://www.enocean.com/products/enocean-software/enocean-tool/

Direct download possible via these QR codes:

With EnOcean Tool you can configure only selected parameters of the products.

Please check the Help Section of Product Manuals in EnOcean Tool for details.

Figure 19 Help Section in EnOcean Tool