User's Manual

© 2020 EnOcean | www.enocean.com PTM 210 / PTM 215 / PTM 215U / PTM 215J User Manual August 2020 | Page 40/45
USER MANUAL
PTM 210 / PTM 215 / PTM 215U / PTM 215J
DC Step code and later
Identifier
Value
Length of data
30S
000001500100
Static Source Address (hex),
EnOcean Radio ID 48 bit format
15 characters (12 data)
+
Field Separator
1 character
13Z
12345678123456781234567812345678
Security AES key (16 Bytes), generated and specific for
each device
35 characters (32 data)
+
Field Separator
1 character
1P
000B00000057
Product ID (EnOcean Alliance),
14 characters (12 data)
+
Field Separator
1 character
30P
S3061-A215
Ordering Code (EnOcean module),
13 characters (10 data)
+
Field Separator
1 character
2P
DC22
Step Code - Revision (EnOcean module), e.g.
6 characters (4 data)
+
Field Separator
1 character
S
123456789012
Manufacturer recognition,
01 + DMC/Serial Number,
15 characters (2 + 12 data)
Total: 102 characters
Table 7 QR code content example based on the above table
The length and content of the QR code can vary from the example for the case of different
module revisions.
6.3 Construction of application specific Switch Rockers
EnOcean provides both 2D mechanical data and 3D construction data (in IGS format) of the
mechanical interface of PTM 21x modules for the design of customer specific frames and
rockers. This data is available here:
https://www.enocean.com/produkte/enocean_module/ptm-215/
Polycarbonate is recommended as rocker material since it is both buckling resistant and wear-
proof. It is also recommended to apply Teflon varnish in the areas of actuation.