User's Manual

USER MANUAL

PTM 210 / PTM 215 / PTM 215U / PTM 215J

DC Step code and later

All PTM 21x devices support two operating modes - a normal mode and a secure mode with

rolling code encryption to enable use in secure applications.

Additionally, to the EnOcean Radio interface the PTM 215 modules include a NFC interface

for device configuration. This NFC interface is powered by the NFC field of an NFC Reader or

an NFC capable smartphone. This makes the communication with the PTM 215 modules pos-

sible even when the PTM is not being actuated. With a smartphone and an App e.g. EnOcean

Tool or with an NFC Reader and a PC tool e.g. EnOcean NFC Configurator it is therefore

possible to read information about the PTM module and write configuration parameters.

1.3 Typical Applications

PTM 21x modules are commonly used in the following areas:

 Building installation

 Industrial automation

 Consumer electronics

Key products include wall-mounted switches and handheld remote controls supporting up to

two rockers or up to four pushbuttons.

Please find below two examples of an PTM module assembled into a white housing. The left

example shows a double rocker application and the right a single rocker application. This is

commonly used in the European market. A wide range of custom designs with different

shapes, materials and colours can be used together with PTM modules as long they respect

the standardized mechanical interface. Refer to the PTM module mounting instructions for

details [1]. This allows customizable designs with well tested and promoted PTM modules.

Figure 5 Example of an assembled PTM Module (single and double rocker wall switch)

To illustrate the stack up in complete switch please find below an explosion drawing show-

ing a possible switch frame mounting with highlighted PTM module highlighted red.