User's Manual

USER MANUAL PREVIEW
PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER
© 2022 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535BZ User Manual | v1.2 | July 2021 | Page 53/121
The bit fields within the RADIO_CONFIG register are shown in Table 16 below. The default
settings are shown in bold.
Bit Configuration Option Supported Settings
2:0
BLE_CHANNEL_SELECTION
Selects the radio channels used
for telegram transmission
0b000: Commissioning Telegrams on Advertising Channels
Data Telegrams on Advertising Channels
0b001: Commissioning Telegrams on Advertising Channels
Data Telegrams on 3 custom channels (CH1, CH2, CH3)
0b010: Commissioning Telegrams on Advertising Channels
Data Telegrams on 2 custom channels (CH1, CH2)
0b011: Commissioning Telegrams on Advertising Channels
Data Telegrams on 1 custom channel (CH1)
0b100: Commissioning Telegrams 3 custom channels (CH1, CH2, CH3)
Data Telegrams on 3 custom channels (CH1, CH2, CH3)
0b101: Commissioning Telegrams on 2 custom channels (CH1, CH2)
Data Telegrams on 2 custom channels (CH1, CH2)
0b110: Commissioning Telegrams on 1 custom channel (CH1)
Data Telegrams on 1 custom channel (CH1)
0b111: RFU
3
BLE_DATA_RATE
Selects the data rate
0b0: 1 Mbit/s
0b1: 2 Mbit/s
4
BLE_ADV_INTERVAL
Selects the advertising interval
0b0: 20 ms
0b1: 10 ms
5
BLE_ADDRESS_MODE
Selects the address mode
0b0: Static Source Address
0b1: Resolvable Private Address
6
BLE_INPUT_STATUS
Selects the input status encoding
0b0: INPUT_STATUS uses default encoding
0b1: INPUT_STATUS uses customer-defined encoding
7 RFU 0b0 (Always set to 0b0)
Table 16 – BLE_TX_CONFIG register settings