User's Manual

USER MANUAL PREVIEW

PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER

5.6.7 BLE Radio Channel Registers CH1, CH2, CH3

The BLE channel selection registers CH1, CH2 and CH3 define the radio channels used for

custom radio transmission sequences as described in Chapter 3.1.2 if use of custom radio

transmission sequences is enabled as described in Chapter 5.6.3.

If custom radio transmission sequences are enabled, then the radio channels specified in

CH1, CH2 and CH3 will be used. Figure 42 shows the structure of these registers.

Figure 42 – BLE Radio Channel Registers CH1, CH2 and CH3

5.6.8 BLE_INPUT_STATUS_x

PTM 535BZ can transmit user defined-values in the INPUT_STATUS field of BLE data tele-

grams instead of the standard values as described in Chapter 3.4.1.2. This feature can be

enabled by setting the BLE_INPUT_STATUS field of the BLE_TX_CONFIG register to 0b1.

If this feature is enabled, then PTM 535BZ will select the value of the INPUT_STATUS field

within the BLE data telegram from one of the eight registers BLE_INPUT_STATUS_0 …

BLE_INPUT_STATUS_7 depending on the input status. The Index field provided in Table 3 of

Chapter 3.4.1.2 for the applicable input status is used to select the register.

For instance, if INPUT1 is not connected, INPUT2 is not connected and the ECO 200 harvester

is pressed then Index = 0. If user defined-values for the INPUT_STATUS field of BLE data

telegrams are enabled, then the value of BLE_INPUT_STATUS_0 register would be transmit-

ted in the INPUT_STATUS field of the BLE data telegram.

Setting the value of a BLE_INPUT_STATUS_x register to 0xFF will cause PTM 535BZ to not

transmit a data telegram. This can for instance be useful is PTM 535BZ should only transmit

a data telegram upon button press.