User's Manual

USER MANUAL PREVIEW

PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER

A.3 Functional Requests

PTM 535BZ enables the user to trigger the following functional requests via the NFC interface:

 Commissioning telegram request

 Decommissioning telegram request (only when transmitting ZGP data telegrams)

 Factory reset request

These requests are describe in detail in the next chapters.

A.3.1 Commissioning telegram request

Transmission of a commissioning telegram can be triggered by pressing the LRN button both

when transmitting BLE radio telegrams and when transmitting ZGP radio telegrams. In addi-

tion to that, transmission of a commissioning telegram can also be requested via the NFC

interface.

A.3.1.1 Commissioning telegram request by USER1

Transmission of a commission telegram can be requested by USER1 as follows:

Command Description

SearchTag(32)

Connect to tag

(Search for up to 32 byte ID)

ISO15693_WriteSingleBlock(0x0050,0x12 0x00 0x00 0x00)

Identify request and originator

Commissioning Telegram Request

Issued by USER1

ISO15693_WriteSingleBlock(0x0052,0x02 0x00 0x35 0xE5)

Authenticate request

(PIN Code of USER1)

PTM 535BZ will evaluate and execute this request upon the next actuation of the ECO 200

harvester as described in Chapter 5.1. PTM 535BZ will then return one of the following re-

sponses:

Response Code Response Type Description

0x32

SUCCESS The requested operation was successfully executed

0x52

IN PROGRESS

The requested operation is in progress

(Additional ECO actuations are required to complete the operation)

0x72

PIN ERROR The provided PIN code (USER1_PIN) is incorrect