User's Manual

USER MANUAL
© 2013 EnOcean | www.enocean.com TCM 300x / TCM 320x User Manual | Page 21/53
TCM 300 / TCM 300C / TCM 300U
TCM 320 / TCM 320C / TCM 320U
3.9 Remote management
TCM 3x0 supports the remote management specification which is available from EnOcean
upon request. This allows controlling the teach-in procedure via a Remote Config Control
device.
3.9.1 Remote Management Control Commands (RMCC)
All RMCCs supported.
Mode
Reaction to ACTION COMMAND (Function code 0x005)
0
RMI HIGH for 1 s.
1
LMI HIGH, and LRN_TOGGLE on for 1 s.
2
LMI HIGH, and CHANNEL0 invert for 1 s.
3
LMI HIGH, and all CHANNELx inverted for 1 s.
4
LMI HIGH, DIM IND inverted, and PWM inverted for 1 s.
5
Reserved for future use
3.9.2 Remote Procedure Calls (RPC)
Supported RPCs:
 Remote learn command, function code 0x201
 Smart ACK: Read mailbox settings, function code 0x205, settings type 0x01
 Smart ACK: Delete mailbox, function code 0x206, operation type 0x02
REMOTE LEARN COMMAND:
EEP: 0x000000
Mode
Flag in command
Reaction
0
n.a.
No reaction, no Learn Mode available
1
0x01
0x03
Start Remote Learn Mode
Stop Remote Learn Mode
2
0x01
0x03
Start Remote Learn Mode
Stop Remote Learn Mode
3
0x01
0x02
0x03
Start Remote Learn Mode
Next channel
Stop Remote Learn Mode
4
0x01
0x03
Start Remote Learn Mode
Stop Remote Learn Mode
5
n.a.
No reaction, reserved for future use
The signalling is the same as described above in 3.8.
Differences between remote learn mode and normal learn mode:
 In remote learn mode also repeated telegrams will be accepted
 3 transmissions within 2 seconds are required, instead of 1 transmission
For detailed information on remote management please refer to the Remote Management
system specification.