User manual

11
MANUAL •Mounting
STEP 1
Drill a ½" hole through center of
metal stud. Hold metal channel
flat alongside plastic straps and
slide channel through hole.
STEP 2
Hold ends of straps between
thumb and forefinger and pull
toward you until channel rests
flush behind wall. Slide plastic cap
along straps with other hand until
flange of cap is flush with wall.
STEP 3
Snap straps at wall by pushing side
to side, snapping off straps level
with flange of cap.
Patented under one or more of the following U.S. Patent Nos.: 4,993,901; 5,028,186; 5,161,296;
5,938,385; 6,161,999; 7,144,212; 7,320,569; and foreign counterparts thereof and of 4,650,386 and
4,752,170. Other patents pending.
TOGGLER and typeface, symbol, TA, TB, TC, TH, ALLIGATOR, SNAPTOGGLE, and SnapSkru are
worldwide registered trademarks of Mechanical Plastics Corp.
SNAPTOGGLE® METAL STUD ANCHOR INSTALLATION
1/2”
3/8” - 3 5/8”
Thick
Must be 1-7/8” minimum
clearance behind wall for
channel rotation.
Metal Stud
Metal Stud
1/2”
3/8” - 3 5/8”
Thick
Must be 1-7/8” minimum
clearance behind wall for
channel rotation.
Metal Stud
Metal Stud
1/2”
3/8” - 3 5/8”
Thick
Must be 1-7/8” minimum
clearance behind wall for
channel rotation.
Metal Stud
Metal Stud