Connector Brochure

Enphase

Energy

Enphase

Frame Mount

A Frame Attach Solution That Makes Installations Quick, Easy, and More Affordable

Makes Enphase Microinverters Compatible

with Railless and Ballasted Systems

• Boltsmicroinvertersdirectlytothemoduleframe,

eliminatingdesignchallengeswithbothresidentialand

commercialsystems

• Comesintwosizesthattthemajorityofmodules

Faster Installations

• Boltmicroinverterstomoduleframesontheground,then

carrythecompletemoduleuptotheroofforrapid,drop-in

installation

• Simple,two-piecebracketattachesinthreeeasysteps

More Affordable

• InstallingwiththeEnphaseFrameMountrequiresfewerparts

thanotherframemountsolutions,savingyoumaterialcosts

• Reducelaborcostswithfaster,moreefcientinstallations

Reliable

• TheEnphaseFrameMountismadeofanodizedaluminum

forastrong,rust-freebracket

• EngineeredspecicallyforusewithEnphaseMicroinverters

TondoutmoreaboutEnphasetechnology,visitenphase.com

1 Place the clamp

Simply place the clamp over the

edge of the module frame.

2 Lock it in

With the cap screw threaded

into the bracket, slide the

Enphase Microinverter on

top of the bracket.

3 Bolt it down

With the bracket under the clamp,

tighten the cap screw with a half-

inch socket wrench.

Clamp

Bracket

Features

PAGE 1
Enphase® Energy Enphase Frame Mount ® A Frame Attach Solution That Makes Installations Quick, Easy, and More Affordable Clamp Bracket 1 Place the clamp Simply place the clamp over the edge of the module frame. 2 Lock it in 3 Bolt it down With the cap screw threaded into the bracket, slide the Enphase Microinverter on top of the bracket. With the bracket under the clamp, tighten the cap screw with a halfinch socket wrench.
PAGE 2
Enphase® Energy Enphase Connector Clip ® An Effective Cable Management Solution for the Enphase Cabling System 1 Choose the location Position the Connector Clip where you want to attach it on the module frame. 2 Attach it Press down to snap the Engage Cable into place.