Enphase IQ8 Install and Operation Manual

IQ8 / IQ8+ / IQ8M / IQ8A / IQ8H Micro Installation and Operation

Parts and Tools Required

In addition to the microinverters, PV modules, and racking, you will need the following:

Enphase Equipment

• Enphase IQ Gateway: Required to monitor production. IQ Gateway (model ENV-IQ-AM1-240)

communications gateway or IQ Combiner (model X-IQ-AM1-240-B, X-IQ-AM1-240-2, X-IQ-

AM1-240-3, X-IQ-AM1-240-3C).

• Enphase Installer App: Download the Enphase Installer app, open it, and log in to your

Enphase Installer Platform account. Use it later to scan microinverter serial numbers and

connect to the IQ Gateway to track system installation progress. To download, go to

enphase.com/installerapp or scan the QR code at right.

• Tie wraps or IQ Cable Clips (Q-CLIP-100)

• Enphase Sealing Caps (Q-SEAL-10) for any unused drops on the Enphase IQ Cable

• Enphase Terminator (Q-TERM-10) typically two needed per branch circuit

• Enphase Disconnect Tool (Q-DISC-10)

• Enphase Field Wireable Connectors (male and female: Q-CONN-10M and Q-CONN-10F)

•

Enphase IQ Cable:

Cable Model

Connector Spacing

PV Module

Orientation

Connector Count

per box

Q-12-10-240

1.3m

Portrait

240

Q-12-17-240

2.0m

Landscape(60-cell)

240

Q-12-20-200

2.3m

Landscape(72-cell)

200

Other Items

• AC junction box

• Number 2 and 3 screwdrivers

• Wire cutters, voltmeter

• Torque wrench, sockets, wrenches for mounting hardware