IQ Cable Clip bulk 100 pack Inverter Accessory Installation

IQ 6/IQ 6+ Micro Installation and Operation

Step 3: Mount the Microinverters

A. Mount the microinverter bracket side up (as shown) and under the PV module, away

from rain and sun. Allow a minimum of 1.9cm (3/4”) between the roof and the microinverter.

Also allow 1.3 cm (1/2”) between the back of the PV module and the top of the microinverter.

WARNING: Install the microinverter under the PV module to avoid direct exposure to

rain, UV and other harmful weather events. Do not mount the microinverter upside down.

B. Torque the microinverter fasteners as follows. Do not over torque.

 6 mm (¼”) mounting hardware: 5 N m (45 to 50 in-lbs.)

 8 mm (5/16”) mounting hardware: 9 N m (80 to 85 in-lbs.)

 When using UL 2703 mounting hardware, use the manufacturer’s recommended

torque value

AC Connector

DC Connector