Install Manual

Envoy-S Installation and Operation
 2015 Enphase Energy Inc. 141-00027 Rev 01
32
Diagnose Network Connection
Select Diagnostic Tools to ping the Envoy, check network
connectivity, and check the network route.
Ping: To check that the router or network host connected to the
Envoy:
 Select Ping.
 Enter the IP address or url for the router or network
host.
The application displays a loading message until results
are returned. If the router or network host is connected
to the Envoy, the Ping returns a success message. If
the router or network host is not connected to the
Envoy, the Ping returns the following:
ping: bad address <xxx>
Check Network Connectivity: To check network connectivity
details for the Envoy:
 Select Check Network Connectivity.
The application displays a loading message until results
are returned. When the results return, the application
displays a collection of basic network diagnostic checks
and results for the Envoy.
Check Network Route: To see the Envoy’s path to the Internet
for all network interfaces:
 Select Check Network Route.
The application displays a loading message until results
are returned. When the results return, the application
displays a collection of routing details for the Envoy’s
path to the Internet.