Installation Manual

IQ 6/IQ 6+ Micro Installation and Operation

Enphase IQ6-60-2 and IQ6-60-5-US Microinverter Parameters

Topic

Unit

Min

Typical

Max

Approved for wet locations

Yes

Pollution degree

PD3

Standard warranty term

enphase.com/warranty

Compliance

UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003

Class B, CAN/CSA-C22.2 NO. 107.1-01

This product is UL Listed as PV Rapid Shut Down

Equipment and conforms with NEC-2014 and NEC-

2017 section 690.12 and C22.1-2015 Rule 64-218

Rapid Shutdown of PV Systems, for AC and DC

conductors, when installed according manufacturer’s

instructions.

Grounding

The DC circuit meets the requirements for ungrounded

PV arrays in NEC. Ground fault protection (GFP) is

integrated into the class II double insulated

microinverter.

Monitoring

Enlighten Manager and MyEnlighten monitoring options

require an Enphase IQ Envoy

Communication

Power line

Integrated DC disconnect

The DC connector has been evaluated and approved

for use as the load-break disconnect required by NEC

690.

Integrated AC disconnect

The AC connector has been evaluated and approved for

use as the load-break disconnect required by NEC 690.