IQ7+ Micro Installation
Table Of Contents
- Important Safety Information
- The Enphase IQ System
- Planning for Microinverter Installation
- Parts and Tools Required
- Enphase Microinverter Installation
- Step 1: Position the Enphase Q Cable
- Step 2: Position the Junction Box
- Step 3: Mount the Microinverters
- Step 4: Create an Installation Map
- Step 5: Manage the Cabling
- Step 6: Connect the Microinverters
- Step 7: Terminate the Unused End of the Cable
- Step 8: Complete Installation of Junction Box
- Step 9: Connect the PV Modules
- Step 10: Energize the System
- Set Up and Activate Monitoring
- Troubleshooting
- Technical Data
![](/manual/enphase/iq7plus-72-2-us/iq7-micro-installation-english/images/img-17.png)
IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation
© 2018 Enphase Energy Inc. All rights reserved. 141-00043-02
17
Step 4: Create an Installation Map
The Enphase Installation Map is a diagram of the physical location of each microinverter in your PV
installation. Copy or use the blank map on page 38 to record microinverter placement for the system or
provide your own layout if you require a larger or more intricate installation map.
Each Enphase Microinverter, Envoy, and Battery have a removable serial number label. Build the
installation map by peeling the serial number labels from the microinverter mounting plates and placing
the labels on the map. You will also place the Enphase IQ Envoy and IQ Battery serial number on the
map after installation.
After you have created the installation map, use the Enphase Installer Toolkit mobile app to record serial
numbers and configure the system.
For Installer Toolkit details refer to “Detect the Microinverters” in the help topics of the Installer Toolkit
app.
A. Peel the removable serial number label from each microinverter and affix it to the respective
location on the paper installation map.
B. Peel the label from the IQ Envoy and any Enphase Battery, if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
Affix serial number
labels