IQ Cable Bulk Pack, Portrait Manual

IQ 6/IQ 6+ Micro Installation and Operation

 In situations where portrait modules are widely spaced, you may need to use landscape

spaced cables for the portrait oriented PV modules and create loops of excess cable, if

needed.

WARNING: Do not form loops smaller than 12 cm (4.75”) in diameter.

Enphase Q Cable Accessories

The Enphase Q Cable is available with several accessory options for ease of installation, including:

 Enphase Q Aggregator: (Q-BA3-1P-60) Aggregates up to three fully populated 20A branch

circuits and supports solar arrays of up to 11.5kWac with a single rooftop aggregator

 Field wireable connectors (male): (Q-CONN-10M) Make connections from any Q Aggregator

open connector or Field Wireable female connector

 Field wireable connectors (female): (Q-CONN-10F) Make connections from any Q Cable open

connector or Field Wireable male connector

 Cable clips: (Q-CLIP-100) Used to fasten cabling to the racking or to secure looped cabling

 Disconnect Tool: (Q-DISC-10) Disconnect tool for Q Cable connectors, DC connectors, and AC

module mount

 Q Aggregator sealing caps (male): (Q-BA-CAP-10) Sealing cap for unused aggregator

connections

 Q Cable sealing caps (female): (Q-SEAL-10) One needed to cover each unused connector on

the cabling

 Terminator: (Q-TERM-10) Terminator cap for cut cable ends