Data Sheet
Table Of Contents
- Planning for an IQ Microinverter System
- IQ 6 and IQ 6+ Micros
- IQ 7 and IQ 7+ Micros
- IQ 7X Micros
- Q Cable and IQ Micro Accessories
- IQ System Design using the IQ Combiner
- IQ System Design using the IQ Combiner+ and IQ Combiner 3
- IQ System Design with Q Aggregator
- IQ Envoy Installation Options
- Field Wireable Q Connectors and Raw Q Cable
- Splicing Q Cable and Raw Q Cable with Junction Boxes
- Example IQ Microinverter System Layouts and Bill of Materials (BOMs)
- Wire Management of AC and DC Cables Under Array
- AC Wire Management at the Junction Box or Q Aggregator
- Installing IQ Microinverters with Frame Mount Bracket
- Installing the Power Line Filter (Q-LCF-064-1P)
Planning for an IQ Microinverter System
© 2018 Enphase Energy Inc. All rights reserved. December 13, 2018
15
Integra H12104H*** Enclosures
• Strong metal or poly backplate options,
NEMA4, lockable
• Approximate dimensions are 10"x12"x5"
• Easily accommodates addition of a field
wired receptacle, if needed
• Manufacturer provides a wide variety of
enclosure options, including mounting tabs,
and vents
Attabox AH12106 Enclosure with BP1210A back plate
• Strong metal or poly backplate options, NEMA4, lockable
• Approximate dimensions are 10"x12"x5"
• Easily accommodates the addition of a field wired receptacle, if needed
• Manufacturer provides a wide variety of enclosure options, including mounting tabs, and vents
Cantex 5133714 Enclosure with Cover and Gasket
• NEMA4, PVC electrical enclosure
• Approximate dimensions are 12” x 12” x 6”
• Requires eight screws to install or remove cover and gasket