Installation

IQ 6/IQ 6+ Micro Installation and Operation

Using the Enphase Q Aggregator

The Enphase Q Aggregator lets you install systems up to 11.5 kW with only two line conductors and a

ground coming from the roof. It is usable in any position up to 45 degrees from horizontal. (NEMA 3R,

includes drain holes). The Q Aggregator bracket is ready to install on rail, but can be flipped for mount or

roof block.

You will need the following items:

Enphase Items

 Enphase Q Aggregator(s) for multiple branch arrays

 One bulkhead connector cap (Q-BA-CAP) (included with Q Aggregator). You may need to

order an extra cap if you connect only one branch circuit to the aggregator.

 Enphase Q Aggregator Quick Install Guide.

 Enphase Disconnect tool.

Other Items

 Crimp tool PV-CZM-18100, -019100, or -22100 for Field Wireable connectors

 Drill with an appropriately sized hole saw

 Screwdrivers

 Wire stripping tool

 Torque wrench and sockets for mounting hardware

 90° C-rated conductors for connections between the Q Aggregator and main PV breaker.