User's Manual

PLLRECEIVER SYSTEM
Thank you for selecting UHF PLL synthesized Diversity System. Before
operating please read this instruction manual carefully and thoroughly in order to
attain the correct operating procedures and achiece the best results.
The UHF wireless receiver with advanced PLL synthesized true dirversity
reception design.provides the efficacy for eliminate the random noise interference
when the receiver is at standby state :Audio output is equipped with both balanced
and unbalanced outputs for cirtually all amplifiers input.
This system includes the following accessories:
Audio Output Cable x1 Lnstruction Manual x1
Antenna x2 AC/DA Adapter x1
Microphone x4
(1)Antenna Input Connector
(2)Poewr Switch&Indicctor:When switch is turned on,red indicator illuminates to
denote normal poewr status.
(3)LCD manifestation (You can see:the channel show,frequency show)
(4)AF volume control
(5)Bakabced Audio Output Jcak
(6)Unbalanced Audio Output JACK
(7)Power input Jack
1.Parts Name and Functions
1.Install antenna in rear (1).Exteend antenna to fulledt position .see Fig.3.
2.Power Iutput Connection:
Connect the AC power adapter cable to 220V AC JACK(8),and the end unit into an
apprpproate AC outlet with caution to the correct voltage under both AC outlet ,as
shown in Fig.4
3.Audion Output Connection:
(a)Unbalanced Output:Using audio output cable attached with “PHONE
PLUG”type,connect one end from the unbalaned output jack(7)of the receiver
,and the other end ot the “LINE-IN”input jack of the amplifier ,as shown in Fig.3.
(b)Balanced Output:Using audio output cabaes attcached with XLR or”Can-
non”type,connect one end from the balanced output jacks(6)of the receiver,and
the other end to the”MIC IN”input juck of the mixer or amplifier,as shown in
Fig.3.(The charateristic of the 3-pin connector is as shown in Fig.5)
2.Installation of the Receuver
1、GND
2、HOT
3、COLD
1 2
3
DC-12
ANT A
Fig.3
Fig.4
100-240V
Fig.5
21
ANT B
OUT B OUT A DC-12MIX OUT
ANT A
PROFESSIONAL
WIRELESS MICROPHONE
USER MANUAL
FREQUENCY
CHANNEL
Mhz Mhz
A
FREQUENCY
CHANNEL
B
FREQUENCY
CHANNEL
Mhz Mhz
A
FREQUENCY
CHANNEL
B
MHz
POWER
MHz
POWER
MHz
POWER
MHz
POWER
A.Front Panel
A.Rear Panel
(4)
(1) (5)
(6)
(7)
(3) (3) (4) (2)
Fig.1
Fig.2
FREQUENCY
CHANNEL
Mhz Mhz
A
FREQUENCY
CHANNEL
B
FREQUENCY
CHANNEL
Mhz Mhz
A
FREQUENCY
CHANNEL
B
12-18V
DC INPUT ANTENNA D ANTENNA CBALANCED
D
BALANCED
C
ANTENNA BBALANCED
B
ANTENNA ABALANCED
A

Summary of content (5 pages)