User's Manual

ManualsBrandsENPING KARSECT ELECTRONICS ManualsElectronicsMonitor System

Agent:

PLL

Professional Wireless Monitor System

Thank you for purchasing this product, please read this instruction

carefully so that can understand how to operate the product of style

you bought correctly. Please store this instruction in a safe place

after reading as a reference in the furture.

USER MANUAL

KP1R/KP1TA

www.karsect com.

Summary of content (7 pages)

PAGE 1
KP1R/KP1TA Professional Wireless Monitor System PLL Copyright 2008, Karsect Incorporated www.karsect com. Agent: Thank you for purchasing this product, please read this instruction carefully so that can understand how to operate the product of style you bought correctly. Please store this instruction in a safe place after reading as a reference in the furture.
PAGE 2
Specifications: TABLE OF CONTENTS 903-926.5MHz Frequency Range 902-928 MHz Bandwidth 25MHz Oscillation Mode PLL Synthesized 0.005% 0 ~+50 Frequency Stability FM stereo modulation Modulation 8FSK Low: <10mW; High: <100mW Output Power -60dBc Spurious Rejection 25KHz Max. Deviation Range Frequency Response 50~15,000Hz <0.5% (At maximum deviation range at 1KHz) T.H.D. Line leve X2, XLR Audio Output 6.3mm phone jack X2 Audio Input 6.
PAGE 3
Quick Set-Up and Use Guide RACK MOUNTING DUAL RECEIVER 1.Align the receivers side by side so that front panels both face the direction 2.Place the supplied straddle bars in the recesses on the top and bottom of the receivers. KP1TA transmitter So the barsoverlap both receivesrs. CAUTION:DO not over-tighten the screws. KP1R KP1R receiver K P 1R Turn ON the system and set to same frequency and channel KP1TA transmitter KP1R receiver K P 1R 3.
PAGE 4
1. KP1TA Transmitter 4. Mix Mode Application 1.1 Controls and Features 3. The receiver sends the mixed signal to both headphones. Channel 1 Front panel Channel 2 Counterclockwise Mid-Point Clockwise 1. Receiver receives two signals from the transmitter 2. Using the balance knob, the user blends the two signals until the correct mix is achieved. 4. The user may continue to adjust the blend using the balance knob throughout the performance. 1R KP 2 Rear panel 1.
PAGE 5
3. Mix Mode/Stereo Control 1.2 Transmitter Setting 1) Frequency Setting: Short press set button to e nter setting state; T hen short press MENU setting button until the display of frequency/channel is flashing. Short press or setting button at one blow, the frequency/channel will turn up/down a level. Length press or setting button, the frequency/channel will turn up /down continuously.
PAGE 6
2) Volume Limiter Setting: Short press set button until LIM is flashing, then short press button to turn on/off the LIM function. To turn on this function which will display as , it will limit the volume in a range. To turn off this function which will display as . 3) Squelch Setting: Short press set button until SQL is flashing, then short press button to achieve the squelch setting.
PAGE 7
2. KP1R Receiver A. Stereo / Mix Output B. Volume Limiting Function C. Signal Intensity D. Level of Channel2/Audio Right E. Level of Channel1/Audio Left F. Frequency/Channel G. Battery Indicator H. Audio Balanced Setting I. Squelch Setting 2.1 Controls and Features 2.2 Receiver Control 1. Audio Left/Right Control. In according to the indicator of receiver, rotate the audio control knob to adjust the audio left/right or channel 1/ 2.