User Manual

Alarm Management

DVR User Manual

② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”

and “E-mail”. The alarm handling setting of exception detection alarm is similar to that of the

sensor alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings. You can click “Exception Config” to go to the

exception detection configuration interface.

9.3.3 Line Crossing

Line Crossing Configuration:

Alarms will be triggered if someone or something crosses the pre-defined alarm line.

① Click StartSettingsCameraIntelligent DetectionLine Crossing to go to the

following interface.

② Select the camera, enable the line crossing detection and set the duration.

③ Select the direction.