User Manual

Playback & Backup

DVR User Manual

Time Slice Mode Selecting:

Method One: Click the “Year”, “Month” or “Day” button under the record time scale to select

the time slice mode. In “Day” mode, click / on the left/right side of the time scale to

view the record of the last/next day; click “Minute” in the “Picture” option under the time scale

to select “Minute” mode (in “Minute” mode, click the time scale to change the time of the 60

display windows) and click “Hour” to select “Hour” mode.

Method Two: Click beside “Camera Thumbnail” on the left top corner of the interface to

select the time slice mode.

Method Three: Right-click the mouse on any area of the time-sliced interface to go back to the

upper interface.

8.4.2 Smart Search

① Click StartSearch and BackupSmart Search to go to “Smart Search” tab as shown

below.

Behavior Detection: when you select the smart playback mode, the system will analyze the

video including the motion detection, tripwire and intrusion detection.

② Click “Behavior”. Set the searching time period and you will search the channel which has

the intelligence detection record.

③ Check the channel and select the smart playback.

④ Set the backup time and select the channel to backup.

: Smart playback settings button. Click it to set intrusion percentage.

: Full screen motion button.

: Motion button.

: Draw line button. You can search the record of crossing the line after drawing the line.