User Manual

Alarm Management

DVR User Manual

“Draw Area” and then click around the area where you want to set as the alarm area in the

image (the alarm area should be a closed area). Uncheck the “Draw Area” if you finish the

drawing. Click the “Clear” button to delete the alarm area.

⑤ Click “Apply” to save the settings.

⑥ Click “Processing Mode” to go to the alarm handling configuration interface of object

detection.

Object Detection Alarm Handling Configuration:

① Click StartSettingsAlarmIntelligence AlarmObject Detection to go to the

following interface.

② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”

and “E-mail”. The alarm handling setting of object detection alarm is similar to that of the

sensor alarm (see 9.1 Sensor Alarm for details).