Specifications

BrightEye 76
113
www.ensembledesigns.com tel [phone]
Specications
Analog Video Input
Number One
Type HD or SD :Y, Pr, Pb
(SMPTE or Beta levels)
HD or SD: Analog Component RGB
(sync on green)
Analog Composite PAL or NTSC
Analog S-Video PAL or NTSC
Resolution Digitized at 12 bits
Impedance 75 Ω
Return Loss >40 dB
Input DC +/-1 volt DC
Input Hum <100 mV
Analog Audio Inputs
Number Two
Type Balanced
Impedance >15K Ω
Maximum Input Level 24 dBu
CMRR >60 dB, 20 Hz to 10 KHz
Quantization 24 bits, 128 x oversampled
Sample Rate 48 KHz
Reference Level -10 dBu or +4 dBu
Frequency Response ±0.1 dB, 20 Hz to 20 KHz
Crosstalk <106 dB
Dynamic Range >106 dB
Optical Output
Number One
Type SD and ASI
(SMPTE 297M, optical equivalent
of 259M)
HD (SMPTE 274M, 292M or 296M)
Wavelength 1310 nm (1550 by special order)
Power -7 dBm
Max Cable Length 20 km
Fiber Type Single Mode
Multi-mode compatible with
8 dB attenuation at transmit end
Connector SC
Embedded Output (In Optical Output)
Group Assign One of four groups
Channels Two
Bit Depth 24 Bit
HD Standards Support:
1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
Reference Input
Number One
Type 1 V P-P Composite Video, PAL
or NTSC or Tri-Level Sync
Impedance 75 Ω
Return Loss >40 dB
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 6 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95%, non-condensing
HD or SD SDI Optical Out
(Follows Input)
Pr, R In
C, Pb, B In
Cpst, Y, G In
Serializer
Embedder
Proc
Amp
TBC/
Frame Sync
14 bit
A to D
Converter
and
Decoder
Reference In
Analog HD or SD
2 Channel
A to D
2 Channel
Analog Audio In
Analog SD In Yields SD SDI Out
Analog HD In Yields HD SDI Out
Mixer/Shuffler