Specifications

146
BrightEye 92-A
HD Downconverter with Analog Audio
www.ensembledesigns.com tel [phone]
Easy To Use
BrightEye 92-A will downconvert any type of HD signal and
provides both an SD SDI output and an analog composite
output that are suitable for broadcast or monitoring.
The built-in Frame Synchronizer allows you to feed
asynchronous signals to the BrightEye 92-A. A special
Mirror Output Mode can be enabled, causing the output
image to be ipped left to right for use with on-camera
talent. An external reference input allows genlock to a
house reference. All vertical interval data and closed
captioning is faithfully passed.
Downconverting to Standard Denition
BrightEye 92-A will downconvert any type of HD signal and
provides both an SD SDI and an analog composite output
suitable for broadcast or monitoring.
Audio Processing
BrightEye 92-A handles both embedded audio and analog
audio. Sixteen channels of embedded audio are supported
in BrightEye 92-A. If the incoming video has embedded
audio, the audio will be safely bypassed around the video
processing and lipsync will be preserved. Audio mixing is
available for two of the four embedded groups of audio.
Audio Monitoring
Audio monitoring is easy with BrightEye 92-A's convenient
3.5 mm mini jack. Select the audio channels you want to
monitor from the front panel and plug in a headset.
Monitoring with HDMI
The HDMI connector on the rear of the unit provides a future
proof monitoring interface. Plug it into most LCD monitors
for condence monitoring of your feed.
Front Panel and Software Control
Input selection, gain control, and test pattern controls are
provided through the front panel interface. Audio presence LEDs
indicate which channels are detected. Controls for crop, letterbox
and pillarbox are accessed from the front panel or BrightEye Mac
or PC software. Video and audio levels and the audio mixer can be
adjusted through BrightEye Mac or PC software.