Programming instructions

Section 10 — Wave Data Parameters
Command/Amp Page 19
CMD
FADE OUT
AMP
Press Command / Amp / 6
This command scales the volume of the wave data from 100% to 0% to create a digital FADE
OUT of the sound. The parameters are the same as above.
Before: After:
START
ADDR
END
ADDR
• Select FADE OUT. Press Enter•Yes.
• Select START ADDR=## (##). Scroll to END ADDR=## (##).
• Scroll to SCALE DEPTH=## (##). Press Enter•Yes.
• The display reads KEEP=OLD NEW.
• Press Enter•Yes to complete the command (or Cancel•No to keep the original).
Note: When STEREO LAYER LINK= ON, this command will be simultaneously performed on the
corresponding WaveSample in the companion layer.