Brochure

Product cards, dimensional drawings and 3D models can be found at ensto.com/products/enclosing-solutions

IK code Impact energy

(joules)

01-05 <1

06 1

07 2

08 5

09 10

10 20

1st numeral 2nd numeral

0 No protection 0 No protection

1 Protection against objects ≥ 50 mm 1 Protection against vertically falling water drops

2 Protection against objects ≥ 12.5 mm 2 Protection against rain drops falling at max. 15° angle

3 Protection against objects ≥ 2.5 mm 3 Protection against rain drops falling at max. 60° angle

4 Protection against solid objects ≥ 1 mm 4 Protection against rain drops falling from all directions

5 Protection against dust, limited intrusion acceptable in all directions 5 Protection against low pressure jet water from all directions*

6 Total protection against dust 6 Protection against jet water under pressure*

7 Protection against water intrusion under submersion at 1 m depth, 0.5 hour

8 Protection against water intrusion under long term submersion under pressure

9 Protection against high pressure and high temperature water jets

1st numeral: Protection against intrusion

2nd numeral: Protection against water

Protection against external mechanical impact

*Minor intrusion acceptable

Degree of protection

The IP Code consists of the letters IP followed by two digits and an

optional letter. The rst numeral of the code classies the degrees

of protection provided against the intrusion of solid objects and

IK code is an international numerical classication for the degree

of protection provided by enclosures for electrical equipment

IP Code (European standard EN 60529)

dust. The second numeral species the protection against water.

The optional letter may be appended to classify only the level of

protection against human access to hazardous components.

IK code (European standard EN 62262)

against external mechanical impact. The IK code for our thermo-

plastic enclosures ranges between IK06 and IK10.