User guide

Preparing Your Radio For Use

Attaching / Removing Audio Accessories

1 To attach, remove the accessory cover by unscrewing the

locking screw anti-clockwise (leave cover attached or store

in a safe place). Attach accessory plug by locating over the

socket. Carefully tighten the locking screw clockwise until

finger tight (do not tighten with a screwdriver etc).

2 To remove, unscrew the locking screw by hand in an

anti-clockwise direction (carefully use a coin or

screwdriver if too tight). Ensure you re-fit the accessory

cover so as to protect the socket.

Charging Your Radio

Several charger options are available. Please refer to your

charger user guide.

Turning your radio on

Turn your radio on by pressing the on / off button on the front of the radio. The radio will bleep

and the LED will illuminate constant yellow for approximately 4 seconds, followed by a second

“warble” (if not disabled by the Dealer when programmed).

Attaching / Removing the Aerial

1 To attach, carefully align the aerial with the

socket. Screw in the aerial clockwise (taking

care not to cross the thread) until it is

seated firmly against the top of the radio.

2 To remove, unscrew the aerial

anti-clockwise.

Common