User guide

Common
---
Attaching / Removing the Battery Pack
1
To attach, locate the pegs on the bottom of the
battery into the slots on the radio and press the
top of the battery against the radio. Secure
battery by tightening the screw clockwise by
hand. (Do not over tighten)
2
To remove, unscrew the locking screw
anticlockwise and pull the battery away from the
top of the radio.
Attaching / Removing the Belt Clip
1
To attach, locate the clip into the slot on the
back of the battery and slide up until you
hear a “click”.
2
To remove, pull the tab (a) towards the belt
clip.Then slide the belt clip downwards (b).
Optional Accessories cont...
For complete up to date list of optional accessories visit www.entel.co.uk
1
2
1
2
a
b
6
Preparing Your Radio For Use
CHP1/750 Light weight single earpiece headset with in-line PTT & VOX*
CHP750HS Single earpiece ear defender headset with boom mic and in line PTT for hard hat & VOX*
CHP750HD Double earpiece defender headset with boom mic and in line PTT for hard hat & VOX*
CHP750D Double earpiece headband defender headset with boom mic and in line PTT & VOX*
CHP750BT Bluetooth double earpiece headband defender headset with boom mic and ear cup PTT
CBH750 Spare spring loaded belt clip
* VOX = Voice Operated Transmit (hands free operation)
Simplex/ Duplex Channel Use
Your transceiver has been factory programmed in accordance with International regulations.
The mode of operation cannot be altered from simplex to duplex or vice versa. Simplex or duplex mode is
automatically activated, depending on the channel selected. If you have a licence to use a specific simplex or
semi-duplex channel, contact your dealer who may be able to programme your channel using the transceiver’s
private channel memory.
Bluetooth option board in radio is required to use Bluetooth audio accessories. (Not available for HT644/HT648/HT649)