User guide

3
Remove the accessory connector cover located on top of the radio by
rotating its screw anti-clockwise.
1.2 A TT ACHING AUDIO ACCESSORIES
1. ATTACHING THE BELT CLIP
Align the belt clip with the plastic slots of the battery pack. Slide the
belt clip downwards onto the battery pack, pushing firmly until a click
is heard.
2. BA TTER Y REMOV AL/A TT ACHMENT
1.1 PREPERATION PRIOR TO USE
1. T urn the transceiver of f.
2. Hold the radio and rotate the battery release screw anti-clockwise.
Ensure that you do not hold the battery pack when unscrewing
the release screw as the radio will fall to the floor!
Locate the audio accessory plug on top of the socket and rotate the locking
screw clockwise until finger tight (do not use a screwdriver or coin etc).
Note: The accessory socket is only waterproof with either the accessory
socket cover in place or with an accessory connected.
Figure 1.
Battery removal / Attachment
T o remove rotate
the screw
anti-clockwise
3. To attach the battery: firstly,
place the battery against the
bottom of the radio, then
hinge the battery into place
against the transceiver. Rotate
the battery locking screw
clockwise until finger tight Do
not over tighten the screw.
(Refer to certificate EPSILON 08 ATEX 2374X for permitted accessories)