Owner manual

Example 8, Locking a MAC Address to a Port Using Classification Rules
12-48 VLAN Operation and Network Applications
3. To remove all ports from the Default VLAN Port Forwarding List for Ports 1 and 2, the
following settings are entered using the VLAN Forwarding Configuration screen:
For Port 1:
• VLAN ID: 2
• VLAN Name: Default VLAN
• Port: 1
• Delete
• Frame Type: Untagged
For Port 2:
• VLAN ID: 2
• VLAN Name: Default VLAN
• Port: 2
• Delete
• Frame Type: Untagged
These configuration settings will cause any frame received classified to the Default VLAN to be
dropped, because all ports have been deleted from the VLAN forwarding list of the Default
VLAN.
4. To create two source (src) MAC address classification rules and apply them to the Red VLAN
(VID 2), the following settings are entered using the VLAN Classification Configuration screen:
For the Red VLAN and Port 1:
• VID: 2
• Classification: src MAC Address
• Subclassification/MAC Address: 00.00.00.00.00.0A
• ADD the rule. It will display in the top half of the VLAN Classification Configuration screen.
On the Protocol Port Configuration screen, the following settings are entered:
• Port 1: YES to assign the classification rule to Port 1
• SET PORTS TO VLAN FORWARDING: YES, to add the VLAN and classification rule to
the Port VLAN List of Port 1