- Cabletron Systems Remote Access Switch

USER’S GUIDE
550 CyberSWITCH
Out - DL CFG Slot=<slot #> Port=<port #> Ces=<communication endpoint suffix>
The system is initializing the indicated data link.
Out - DSL CFG Slot=<slot #> Port=<port #>
The system is initializing the indicated line.
Out - init data link <slot #, port #, ces>
The system is sending a message to the network to initialize a data link on an ISDN line. The
<parameters> are used to report line details.
Out - PROCEEDING Call Id=<call Id> Slot=<slot #> Port=<port #> Chans=<bearer channel map>
Ces=<communication endpoint suffix> ConnId=<connect Id>
The system is sending a connection to the network. This is sent in response to receiving a call
indication. The <parameters> are included for your Distributor or Cabletron Customer Support.
Recall dial tone on
Informational call trace message.
Received charge amount - <charge amount>
The system has received an advice of charge from the network for the call just disconnected. The
charge for this call is indicated in the charge amount parameter.
Received unknown abnormal report value Slot=<slot #> Port=<port #> Ces=<communication endpoint
suffix>
Informational call trace message.
Received unknown progress value
Informational call trace message.
Received unknown signal value
Informational call trace message.
Ringback tone on
Informational call trace message.
Status report progress value received
Informational call trace message.
Stutter tone on
Informational call trace message.
Tones off
Informational call trace message.
Unspecified cause
Informational call trace message. This message is used to indicate additional details on the <cause
value> received in the “call progress” information message.Refer to the Cause Codes Table for more
information.
Unspecified tone
Informational call trace message. It is used to indicate additional details on the <signal value>
received in the “call progress” information message. The <tone value> is displayed as one of the
following: dial, ring back, answer, call waiting, off hook warning, custom, recall dial, stutter dial,
or expensive routing.