Ethernet Switch Owner's Manual

set time
Enterasys D-Series CLI Reference 2-17
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythecurrenttime.Theoutputshowsthedayoftheweek,
month,day,andthetimeofdayinhours,minutes,andsecondsandtheyear:
D2(su)->show time
THU SEP 05 09:21:57 2002
set time
Usethiscommandtochangethetimeofdayonthesystemclock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosetthesystemclockto7:50a.m:
D2(su)->set time 7:50:00
show summertime
Usethiscommandtodisplaydaylightsavingstimesettings.
Syntax
show summertime
Parameters
None.
Defaults
None.
[mm/dd/yyyy]
[hh:mm:ss]
Setsthetimein:
month,day,yearand/or
24‐hourformat
Atleastonesetoftimeparametersmustbeentered.