Network Hardware User's Manual

Memory Locations and Replacement Procedures

Matrix DFE-Gold Series Modules Hardware Installation Guide B-13

Installing the DIMM

ToinstallaDIMM,refertoFigure B‐14andproceedasfollows:

1. InserttheDIMMdownbetweentheconnectorfingers.

2. PivottheDIMMdownwardsothetabsontheconnectorarmsalignwiththetwo

DIMMalignmentnotches.Withthetwoconnectorarmsspreadoutward,pushthe

DIMMdownbetweentheconnector

arms.Thenreleasethetwoconnectorarmsto

locktheDIMMintoplace.

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

Figure B-14 Installing the DIMM

1 DIMM 3 Connector arms

2 Connector fingers 4 Alignment notches (2)