User Guide

46 VH-2402S User Interface VH-2402S
Configuring Traffic Classes
IEEE 802.1p defines up to 8 separate traffic classes. This switch supports
Quality of Service (QoS) by using two priority queues, with weighted fair
queuing for each port. You can use the 802.1P Configuration menu to
configure the default priority for each port, or to display the mapping for
the traffic classes as described in the following sections. Also, refer to
Appendix C, “Class of Service” on page 95. .
Figure 2-33. 802.1P Configuration
Vertical Horizon Local Management -- VH-2402S
802.1P Configuration : Selection Menu
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
<OK>
Use <TAB> or arrows keys to move. <Enter> to select.