User Guide

48 VH-2402S User Interface VH-2402S
802.1P Port Traffic Class Information
This switch provides two priority levels with weighted fair queuing for port
egress. This means that any frames with a default or user priority from
0~3 are sent to the low priority queue “0” while those from 4~7 are sent to
the high priority queue “1” as shown in the following screen:
Figure 2-35. 802.1P Port Traffic Class Information
Vertical Horizon Local Management -- VH-2402S
802.1P Port Traffic Class Information
: Unit 1 Port 1 - 12
Port User Priority
0 1 2 3 4 5 6 7
------------------------------------------------------------------
1 0 0 0 0 1 1 1 1
2 0 0 0 0 1 1 1 1
3 0 0 0 0 1 1 1 1
4 0 0 0 0 1 1 1 1
5 0 0 0 0 1 1 1 1
6 0 0 0 0 1 1 1 1
7 0 0 0 0 1 1 1 1
8 0 0 0 0 1 1 1 1
9 0 0 0 0 1 1 1 1
10 0 0 0 0 1 1 1 1
11 0 0 0 0 1 1 1 1
11 0 0 0 0 1 1 1 1
<OK> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Port Numeric identifier for switch port.
User Priority Shows that user priorities 0~3 specify the low priority queue and
4~7 specify the high priority queue.