User`s guide

RMON Statistics Screen
10-12 Device Statistics Menu Screens
10.4.1 Displaying RMON Statistics
To display the statistics for any index, proceed as follows:
1. Use the arrow keys to highlight the Index [nn] field at the bottom of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to decrement) the index
number (number of the port interface).
3. Press ENTER (neither the RMON Index field nor the statistics will change until ENTER is
pressed). The RMON interface index of statistics for the port is displayed.
1024 – 1518 Octets
(Read-Only)
See the total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding framing bits,
but including FCS bytes).
Index [nn]
(Command)
Enter a port number to view its statistics. For instructions on how to use
this command, refer to Section 10.4.1.
CLEAR
COUNTERS
(Command)
Temporarily reset all counters of a screen to zero to allow the user to
observe counter activity over a period of time. For details on how to use
this command, refer to Section 3.1.4.
Table 10-4 RMON Statistics Screen Field Descriptions (Continued)
Use this field… To…