Installation guide

Using LANVIEW
4-2 Troubleshooting
Table 4-1 describes the LED indications and provides recommended actions as appropriate.
NOTE: The terms flashing, blinking, and solid used in Ta bl e 4 -1 indicate the following:
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
CPU Off Power off. Ensure chassis has adequate power.
Red Solid. Resetting, normal
power up reset.
If the LED remains red for several minutes,
contact Enterasys Networks for technical
support.
Amber Blinking. Image is being
loaded from FLASH.
None.
Solid. Testing. Boot
PROM diagnostics are
running.
If the LED remains amber for more than
several minutes, contact Enterasys
Networks for technical support.
Green Solid. Unit is functional. None.
Amber
and
Green
Booting. Blinks amber
and green while booting.
None.