Installation guide

Mode Switch Bank Settings B-1
B
Mode Switch Bank Settings
This appendix covers the following items:
• Required tools (Section B.1)
• Locations, functions, and settings for the mode switches (Section B.2)
B.1 REQUIRED TOOLS
Use the following tools to perform the procedures provided in this appendix:
• Antistatic wrist strap
• Phillips screwdriver
CAUTION: An antistatic wrist strap is required (provided with the module) to perform
the procedures described in this appendix. Use the antistatic wrist strap when
performing any of these procedures to minimize ESD damage to the devices involved.