Installation guide

Installing Optional 5PIMs
3-3
3.2 INSTALLING OPTIONAL 5PIMs
At the time of this printing, two port interface module options (5PIM-G02 and 5PIM-G06) were
available for the 5H152-50 and 5H153-50. Refer to your release notes for the latest available
optional interfaces.
The 5PIM-G02 provides two fixed, 1-Gigabit, port uplinks via twisted pair RJ45 connections.
The 5PIM-G06 provides two port slots for fiber optic, 1-Gigabit, port uplinks via optional GPIMs.
Installing a 5PIM involves
• removing the coverplate on the module,
• attaching the 5PIM to the module, and
• installing the GPIMs, if the 5PIM is a 5PIM-G06.
NOTE: Install any optional equipment before proceeding to Section 3.4.
CAUTION: An antistatic wrist strap is required (provided with the module) to perform
the following procedures to minimize ESD damage to the devices involved.