Installation guide

Completing the Installation

3-26

Figure 3-16 Fiber Port LED Designations

If a link has not been established, refer to Chapter 4 for LED troubleshooting details. Refer to

“Getting Help” in About This Guide for details on contacting Enterasys Networks if a problem

persists.

3.7 COMPLETING THE INSTALLATION

After installing the module and making the connections to the network, proceed as follows:

1. If the chassis is installed in a rack that has strain-relief brackets, secure the cables by running

the cables along the strain-relief bracket and tying them to the bracket using cable ties.

2. The module is now ready to be configured through Local Management. Refer to the MATRIX

E5 Series Modules Local Management User’s Guide for information on how to access and use

Local Management. For details on how to get manuals, refer to the “Related Documents”

section in About This Guide.

36771_20

5PIM-G06