Installation guide

GPIM Specifications C-1
C
GPIM Specifications
The optional 5PIM-G06 can support any combination of two GPIMs (GPIM-01, GPIM-08, and
GPIM-09). This appendix lists the input/output port specifications and regulatory requirements for
the GPIMs and the media they use. Enterasys Networks reserves the right to change these
specifications at any time without notice.
C.1 INPUT/OUTPUT PORTS (GPIM OPTIONS)
The following list indicates the number of ports, standards compliance, type of cable connector,
and supported fiber optic cabling for each GPIM.
WARNING: The GPIM-08 and GPIM-09 use Class 1 lasers. Do not use optical
instruments to view the laser output. The use of optical instruments to view laser output
increases eye hazard. When viewing the output optical port, power must be removed
from the network adapter.
GPIM-01 Provides one, 1000BASE-SX compliant SC fiber optic connection.
Supports multimode fiber optic cabling.
GPIM-08 Provides one, 1000BASE-SX compliant
SC fiber optic connection.
Supports single-mode fiber optic cabling.
GPIM-09 Provides one, 1000BASE-SX/LX compliant
SC fiber optic connection.
Supports single or multimode fiber optic cabling.