User guide

Radio and Antenna Configuration
Enterasys Wireless Standalone 802.11n AP User Guide 4-17
Configuring Common Radio Properties
Thissectiondescribeshowtoconfigureradiopropertiesthataresharedbybothradios,suchas
thecountryofoperation,APenvironment,andantennatypes.
Note: If this AP is a WDS parent AP, the settings on the WLAN Radios Common tab are read-only
to prevent child APs from losing their connection.
TodisplaythecommonpropertiessharedbybothofAPradios,navigatetoConfiguration>
WLANRadios.SelecttheCommontabintherightpane.TheCommonconfigurationdisplays.
Field Description
Country Identifies the country where the AP is operating. The default
country is:
• Germany [AP363
0/40 (ROW)]
• Un
ited_States [AP3630/40 (NAM)]
Note: Cha
nging this setting causes the AP to reboot.
AP Environment Specifies where the AP’s antennas are installed — Indoor or
Outdoor; the AP itself is installed indoors. The default for the
antenna location is Indoor.
Note: Cha
nging this setting will cause the AP to reboot.