Specifications

Command Line Interface
3-26
3
Example
Related Commands
enable (3-17)
Web Server Commands
ip http port
Use this command to specify the TCP port number used by the Web browser
interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Related Commands
ip http server (3-27)
Console(config)#enable password level 15 0 admin
Console(config)#
Table 3-21 Web Server Commands
Command Function Mode Page
ip http port Specifies the port to be used by the web browser interface GC 3-26
ip http server Allows the switch to be monitored or configured from a browser GC 3-27
ip http secure-server Enables HTTPS/SSL for encrypted communications GC 3-27
ip http secure-port Specifies the UDP port number for HTTPS/SSL GC 3-28
Console(config)#ip http port 769
Console(config)#