Specifications

Command Line Interface
3-30
3
Command Usage
• The SSH server supports up to four client sessions. The maximum number of
client sessions includes both current Telnet sessions and SSH sessions.
• The SSH server uses RSA for key exchange when the client first establishes
a connection with the switch, and then negotiates with the client to select
either DES (56-bit) or 3DES (168-bit) for data encryption.
Example
Related Commands
show ssh (3-32)
ip ssh timeout
Use this command to configure the timeout for the SSH server. Use the no form to
restore the default setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the
client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the exec-timeout
command for vty sessions.
Example
Related Commands
exec-timeout (3-12)
show ip ssh (3-31)
Console(config)#ip ssh server
Console(config)#
Console(config)#ip ssh timeout 60
Console(config)#