Specifications

Command Line Interface
3-38
3
Example
sntp poll
This command sets the interval between sending time requests when the switch is
set to SNTP client mode. Use the no form to restore to the default.
Syntax
sntp poll seconds
no sntp poll
seconds - Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Command Usage
This command is only applicable when the switch is set to SNTP client mode.
Example
Related Commands
sntp client (3-36)
sntp broadcast client
This command synchronizes the switch’s clock based on time broadcast from time
servers (using the multicast address 224.0.1.1). Use the no form to disable SNTP
broadcast client mode.
Syntax
[no] sntp broadcast client
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#sntp server 10.1.0.19
Console(config)#
Console(config)#sntp poll 250
Console(config)#