Specifications

System Management Commands
3-39
3
Example
show sntp
This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Example
clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
clock timezone name hour hours minute minutes {before-utc | after-utc}
• name - Name of timezone, usually an acronym. (Range: 1-29 characters)
• hours - Number of hours before/after UTC. (Range: 1-12 hours)
• minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)
• before-utc - Sets the local time zone before (east) of UTC.
• after-utc - Sets the local time zone after (west) of UTC.
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
show sntp (3-39)
Console(config)#sntp broadcast client
Console(config)#
Console#show sntp
Current time: Dec 5 00:04:52 2002 ñó
Poll interval: 16
Current mode: unicast
Console#
Console#clock timezone Taipei hours 7 minute 00 after-UTC
Console#