Specifications

Command Line Interface
3-94
3
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (3-94)
snmp-server location
Use this command to set the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (3-93)
snmp-server host
Use this command to specify the recipient of a Simple Network Management
Protocol notification operation. Use the no form to remove the specified host.
Syntax
snmp-server host host-addr community-string [version {1 | 2c}]
no snmp-server host host-addr
• host-addr - Internet address of the host (the targeted recipient).
(Maximum host addresses: 5 trap destination IP address entries)
• community-string - Password-like community string sent with the
notification operation. Although you can set this string using the
snmp-server host command by itself, we recommend that you define this
Console(config)#snmp-server contact Paul
Console(config)#
Console(config)#snmp-server location WC-19
Console(config)#