Specifications

Command Line Interface
3-148
3
Default Setting
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
map ip port (Global Configuration)
Use this command to enable IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP DSCP,
and default switchport priority.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
Table 3-54 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP class of service mapping GC 3-148
map ip port Maps TCP socket to a class of service IC 3-149
map ip precedence Enables IP precedence class of service mapping GC 3-149
map ip precedence Maps IP precedence value to a class of service IC 3-150
map ip dscp Enables IP DSCP class of service mapping GC 3-151
map ip dscp Maps IP DSCP value to a class of service IC 3-151
show map ip port Shows the IP port map PE 3-152
show map ip precedence Shows the IP precedence map PE 3-153
show map ip dscp Shows the IP DSCP map PE 3-154